HIGH PRECISION LATHE 102N-CF Standard composition mounted on BENCH Capacities: - Height of centres : 102 mm - Maximum distance between centres : 470 mm - Swing over bed : 200 mm - Swing over carriage : 120 mm Bed: - Height : 168mm - Depth : 100mm - Length : 1000mm Carriage: - Stroke of the longitudinal tool slide : 90 mm - Stroke of the transverse tool slide : 100 mm - Size of tools 12 x 12 mm Tailstock: - Internal spindle taper : MORSE 2 - Spindle stroke : 80 mm Spindle drive: - Motor power : 1,5 kW - Speed variation by frequency converter with integral braking - Spindle Speed : 5000 rpm - with Lever-operated quick-closing attachment: max. 3000 rpm Controls: - Control panel comprising : - Speed pre-selection - Digital spindle speed indication - Configuration of pedal functions by menu Examples: Spindle Start/Stop - Reverse - Auxiliary functions Colour: - Lathe : LIGHT BLUE NCS 1020-R80B - Cabinet : BLUE RAL 5012 Netweight: about 320 kg Over-all dimensions: - Length - depth - height : 2000 x 800 x 1400 mm - with device 202-95000 : 2000 x 800 x 1540 mm Standard composition: 1 Bench of 2000 x 800 x 900 mm, comprising: - 1 wooden plate of 2000 x 800 x 50 mm, cover : blue Urphen 0 - 1 support 725 / 850 mm on the left side and on the right side : - 1 cabinet LISTA B-314, dim. 564 x 725 x 850 mm - useful height: 750 mm with 7 drawers, front height as follow: 1 x 50 mm EA - 2 x 75 mm EA 2 x 100 mm EA - 1 x 150 mm EA - 1 x 200 mm EA 1 Set of pieces for the motor assembling 1 Equipment for CE - Standards 1 Electrical equipment for 380 / 400 volts 50 Hz, 3-phase - other voltage on request 1 Bed for overhead drive : - 1 Fixing rod 102-10100 1 Screw-operated carriage 1 Adjustable screw-operated tailstock, Morse 2 102N-CF - W-20 reference No: 202-00101 Headstock W-20 : 1 with ball bearings for overhead drive - 1 protective nut W-20 102-20180 - 1 manual drawbar W-20 102-21050 - For chuck type: 20 - W - Spindle bore : Ø 20 mm - Maximum through-bore : Ø 14,5 mm 102N-CF - W-25 reference No: 202-00102 Headstock W-25 : 1 with ball bearings for overhead drive - 1 protective nut W-25 102-25180 - 1 manual drawbar W-25 102-30010 - For chuck type: 25 - W - Spindle bore : Ø 25 mm - Maximum through-bore : Ø 19 mm