High Precision Lathe Schaublin 225 Plus Manual Control Fanuc Power Mate 0 ­ Quick Turn with Digital Read-out The Schaublin 225 plus is a manual lathe with a difference. All turning controls are via electronic handwheels with Fanuc Power Mate providing automatic cycles including screw-cutting, taper-turning, radius and spherical turning in addition to giving digital read-out.   Automatical cycles: turning thread cutting (up to 2'000 RPM) grooving tapping conical turning spherical turning drilling / deburring block to block (max. 4 blocks) radius turning thread correction metric/Inch   225 Plus Capacities: Maximum turning diameter 200 mm Maximum swing over carriage 115 mm Height of centres over carriage 60 mm Turning length 400 mm Headstock Spindle speed 50 ­ 5000 min-1 min With quick clamping direct AC motor drive 4000 min-1 min Power 4 kW Max. torque 26 Nm Spindle nose Camlock D1-3" Max. throughbore with collet 24 mm Max. throughbore with jaw chuck 27 mm Spindle for Schaublin collets B32 Apron and carriage Transverse stroke: X-axis 140 mm AC motor drive, nominal torque 2.9 Nm Ball screw, Ø x pitch 20 x 5 mm Longitudinal stroke: Z-axis 400 mm AC motor drive, nominal torque 2.9 Nm Ball screw, Ø x pitch 20 x 5 mm Resolution, on radius 0.0005 mm Tailstock Spindle taper MORSE 2 Spindle longitudinal stroke 100 mm Starwheel-operated tailstock in option MORSE 3 Milling device in option Feeds Working feeds, X-/Z-axis, stepless 0-5000 mm/min Rapid feed, X-/Z-axis 7.5 m/min Feed power, X-/Z-axis 500 daN Tooling system linear Radial 2 Frontal 2-5 Collets holder ESX 20 Bar holder ø 20 mm MULTIFIX system 16 x 16 Coolant supply in option Capacity of coolant tank 55 l Pump power 10 l/min Pressure 1.7 bars Weight / Dimensions Net weight 1120 kg Dimensions: length - width - height 1600 x 1030 x 1650 mm Loadfloor 700 kg/m2