High precision lathe 70-CF-W-12 mounted on bench   270-00101 HIGH PRECISION LATHE 70-CF - W12 Standard composition mounted on BENCH Main technical Data: Capacities: - Height of centres : 70 mm - Maximum distance between centres : 275 mm Bed: - Length : 600 mm - Height : 120 mm Headstock: - For chucks type : 12 - W - Spindel bore : Ø 12 mm - Maximum through - bore : Ø 8,2 mm Carriage: - Stroke of longitudinal tool slide : 60 mm - Stroke of transverse tool slide : 65 mm - Swing over carriage: - without rear tool holder : 85 mm - with rear toolholder : 45 mm - Height of Centres over carriage : 16 mm - Dimensions of tools : 8 x 8 mm Tailstock: - Internal spindle taper : 2 ° - Spindle stroke : 45 mm Spindle Drive: - Motor Power 0,55 kW - Speed variation by frequency convertor with integral braking - Spindle speed : 5000 rpm max. Controls: - Control panel comprising : - Speed pre-selection - Digital spindle speed indication - Configuration of pedal functions by menu Examples: Spindle Start/Stop - Reverse - Auxiliary functions Colour: - Lathe : LIGHT BLUE NCS 1020-R80B - Cabinet : BLUE RAL 5012 Netweight: about 220 kg Over-all dimensions: - Length - depth - height : 1600 x 800 x 1370 mm - with device 202-95000 :1600 x 800 x 1540 mm STANDARD COMPOSITION : 1 Bench of 1600 x 800 x 900 mm, comprising: - 1 wooden plate of 1600 x 800 x 50 mm, cover : blue Urphen 0 - 1 support 725 / 850 mm on the left side and on the right side : - 1 cabinet LISTA B-314, dim. 564 x 725 x 850 mm - useful height: 750 mm with 7 drawers, front height as follow: 1 x 50 mm EA - 2 x 75 mm EA 2 x 100 mm EA - 1 x 150 mm EA - 1 x 200 mm EA 1 Set of pieces for the motor assembling 1 Equipment for CE - Standards 1 Electrical equipment for 380 / 400 volts 50 Hz, 3-phaes - other voltage on request 1 Bed for overhead drive : - 1 Fixing rod 70-10100 1 Headstock W-12, with ball bearings for overhead drive - 1 protective nut W-12 70-25180 - 1 manual drawbar W-12 70-32030 1 Screw-operated carriage 1 Screw-operated tailstock, Morse 2 Reference No : 270-00101